Akrobat GALLUS 설치 및 사용자 설명서 - 페이지 4

{카테고리_이름} Akrobat GALLUS에 대한 설치 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Akrobat GALLUS 14 페이지.

Gallus 10 ft specific parts

Some parts come in different form with the Gallus 10 ft set.

Therefore, assembly steps marked with * have specific instructions, which are presented on page 12.

Trampoline parts*

Triangular frame part with

Part A1

double socket

Part D1

Extra leg extension part – door

Part F1

Extra junction part – door

Part G1

Extra top frame part – door

INSTALLATION AND USER MANUAL - GALLUS

Gallus

10 ft / 305 cm

1 pc

2 pcs

1 pc

3. ASSEMBLY AND INSTALLATION

We recommend at least two people to assemble the trampoline. Use gloves to protect your hands from pinch points

and sharp points during assembly. Do not apply excessive force during assembly that will cause damage to the product.

IMPORTANT: The specific steps in the assembly process vary depending upon the size of the trampoline.

When assembling Gallus 10 ft, follow the specific instructions for steps marked with *

Additional instructions for this model are presented in next steps of the manual.

Assembling the frame

Place the trampoline frame (parts D, E

and F) flat on the ground. This way you

will have a better overview.

Place the leg extensions on the trampoline legs (part D into part E).

Next, add the junction part to the leg extension (part F and part D). The part with closed bottom is the part

where the safety net poles will be set.

Lock the bottom of the extension and the leg of the trampoline with the pin (part N) that came with the kit.

Repeat the procedure on all legs of the trampoline.

AKROBAT HINT:

Make sure the pin is positioned

correctly and fits snugly to the

trampoline leg.