Dogtra ARC 매뉴얼 - 페이지 3

{카테고리_이름} Dogtra ARC에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dogtra ARC 12 페이지. Handsfree kit
Dogtra ARC에 대해서도 마찬가지입니다: 소유자 매뉴얼 (16 페이지), 제품 설명서 (14 페이지)

2. 1900S HANDSFREE Code Setting Guide

Coding the transmitter and receiver:

1. Turn the transmitter on by pressing the on/off button and set the

Rheostat Dial to 0.

2. With the receiver turned off, hold the on/off button on the receiver

until the LED light begins to rapidly blink green.

3. While the green LED is rapidly blinking on the receiver, press

the two side buttons (Nick & Constant) simultaneously on the

transmitter. The LED light on the receiver will blink every 4 seconds

when coding is complete.

Coding the transmitter and HANDSFREE Remote Controller:

1. Begin with the transmitter turned off.

2. On the handheld transmitter, hold down the following buttons until

you see a rapidly blinking light to code the desired function on the

HANDSFREE Remote Controller.

Constant = Hold down the on/off button and the Constant

Pager = Hold down the on/off button and the Pager

Nick = Hold down the on/off button and the Nick

3. Once you see the rapidly blinking light, release the buttons.

4. Hold down the HANDSFREE Remote Controller button until the

rapidly flashing light on the transmitter and controller both show a

solid light.

5. Release all buttons. To check if the coding is correct, press the

button on the HANDSFREE Remote Controller.