Clockaudio CDT100 사용자 설명서 - 페이지 17
{카테고리_이름} Clockaudio CDT100에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Clockaudio CDT100 17 페이지. Dante transporter
Clockaudio CDT100에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지)
페이지 인쇄8 – Consultants Specifications
The Dante interface unit shall provide four mic analog inputs on the rear panel via 3-pin de-pluggable connectors.
Each of the four inputs will have unity gain and a +48V phantom power option shall be provided via software for each input.
The unit shall provide two RJ-45 network connectors to allow Dante Daisy Chaining (DDC) of multiple units.
The internal analog to digital signal conversion shall be performed at 24-bit resolution with a sampling frequency of 48kHz.
The Dante interface unit shall receive power from an external +12V supply.
Four control ports will be available for interfacing with switch buttons and dual color LED.
An interface for motorized microphones shall be included.
The Dante interface unit shall be compatible with third party control systems for flexible control and monitoring in system
applications.
The Dante interface shall be compatible with Clockaudio CH32 and other Clockaudio control devices.
The Dante interface shall be compliant with the RoHS directive.
The Dante interface unit shall be compliant with the EMI/EMC requirements for FCC and CE.
The Dante interface unit shall be the Clockaudio CDT100.
Audio Inputs
Input Type:
Balanced and RF filtered
Gain:
0dB
Input Impedance:
>1.8K ohms at any gain
Phantom Power:
+48V, software selectable
Audio Performance:
EIN:
-115dBu
System THD+N:
<0.01% at any gain, input signal 3dB
below maximum
Frequency Response
20Hz – 20kHz, +/- 1dB
©
Clockaudio 2015
Dante Network
Physical Level:
Connector:
Cable Quality:
Transmission Speed:
Power Requirements
Power Consumption
Dimensions
Weight
Compliance
CH32 Control Device Inputs
RJ-45
ARM Interface
RJ-12
17
CDT100 User Manual
Standard Ethernet
RJ-45
CAT 5, CAT 6
100 Mbps
+12V DC
4.9W Max
8.32" W x 1.50" H x 4.74" D
1.75 lbs
FCC CFR 47 Parts 15B ICES-003
CE (EN55022) RoHS
Button and Dual color LED