Dogtrace DOG GPS X20 사용자 설명서 - 페이지 9

{카테고리_이름} Dogtrace DOG GPS X20에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dogtrace DOG GPS X20 19 페이지.

5.3 Power supply adapter and cable with a rechargeable clip

Transmitter GPS contains Li-Pol accumulator. The

accumulator must be recharged before first use.

1. Before charging clean the transmitter charging con-

tacts from any dirt. Connect the charging clip to the

transmitter (see the picture).

2. Connect supply cable to power adapter and plug it

into the mains.

3. The orange LED indicator on the transmitter will lit up.

4. Charging time is approximately 3 hours.

5. When the charging is completed, the orange LED

indicator goes OFF.

WARNING: Optimal temperature for charging is from 0°C up to 40 °C. Use only the

original power adapter supplied in the packing with the device. Other chargers

could damage the accumulator.

The status of the accumulator is indicated by LED indicators on the top side of the

transmitter (see chapter: Product destription – transmitter) or symbol of battery on the

LCD of the receiver (handheld device).

status charge

100%

70%

40%

10%

receiver

transmitter

green LED indicator

—

green and red LED indicator together

red LED indicator

1. Power supply adapter

2. USB cable

3. Charging clip