cymatic audio uTrack24 audiolan 매뉴얼 - 페이지 11
{카테고리_이름} cymatic audio uTrack24 audiolan에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. cymatic audio uTrack24 audiolan 20 페이지.
cymatic audio uTrack24 audiolan에 대해서도 마찬가지입니다: 사용자 설명서 (18 페이지)
페이지 인쇄
8. DEVICE FAILURE
The benefit of a multi-device system is having the option of creating a redundant system, running two devices in
parallel, and if one unit should fail, e.g. due to power-loss or hard disk exception, the system still keeps working. It is
crucial for a failing device, and even more so for a reconnecting device, not to interfere with the residual units and
disturb them in their on-going operation.
Whenever a SYNC group member is failing, the rest of the group seamlessly continues the current operation, be it
playback or recording.
When a SYNC group member appears again, it seamlessly joins the SYNC group and stays inactive at first. With the
next transport operation (play, record) the entire SYNC group continues working normally.
SLAVE missing:
When a SLAVE fails, all remaining devices in the SYNC group continue
recording or playing. The MASTER indicates the failure in the display.
MASTER missing:
Should the MASTER fail, the remaining SLAVES will seamlessly continue
recording or playing. The SLAVES will switch to stand-alone mode, activating
their local transport buttons, and all SLAVES indicate the failure in their display.
Note: When the MASTER re-appears while the SLAVES are recording or playing, stop the SLAVES with their own
stop button to form the SYNC group.
9. uREMOTE
uRemote shows SYNC group members as follows:
The MASTER is on top
The SLAVES are indented and in correct order
The entire SYNC group should be controlled through the MASTER unit, as you would do using the local buttons.
Note: Use uTool to rename your units for better identification.
SYNC
uTrack24
Aug. 2016
DEVICE FAILURE
MASTER
SLAVE #1
SLAVE #2
11