ClockedIn SmartHub-FT 설치 매뉴얼 - 페이지 6

{카테고리_이름} ClockedIn SmartHub-FT에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ClockedIn SmartHub-FT 11 페이지.

Precautions for Use

2.2

Temperature detection distance:

• The best distance for temperature measurement: between 0.5-0.7m with

highest accuracy. The accuracy decreases if the temperature detection

distance out of this range.

Body temperature detection:

• To ensure the accuracy of temperature detection, temperature detection

must be performed on the forehead.

Matters needing attention for temperature detection:

• Temperature measuring equipment should be installed in a room with no

ventilation. Room temperature should between 10℃ to 35℃.

• The device should be pre-started and warm up for 10 minutes, until the

sensor temperature and ambient temperature are balanced.

• When measuring temperature, the forehead should be directly facing the

temperature measuring area to ensure the measuring accuracy.

• During temperature measurement, do not move the forehead position, to

avoid temperature change caused by forehead position change.

• Make sure there is no cover on the forehead (hat, hair) and no sweat on the

forehead when doing temperature measure.

• Don't cover your forehead with cold water or warm water before

measurement.

• When measuring temperature, avoid temporarily putting down or taking off

your mask or glasses, to avoid temperature sudden change. Under these

circumstances, please measure the temperature 30 minutes later: after

drinking hot water, meals, naps, and exercise.

• Exposure to certain factors, such as showers, hair dryers and sprays, can

change the temperature of the forehead.

• The temperature measurement accuracy will be affected when people enter

the room from the cold outdoor environment. Please measure again in about

10mins after the body temperature return to normal.

Wall Mounted

2.3

• Drill holes on the wall or other surface according to the mounting plate.