cymatic audio uTrack24 audiolan 매뉴얼 - 페이지 18
{카테고리_이름} cymatic audio uTrack24 audiolan에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. cymatic audio uTrack24 audiolan 20 페이지.
cymatic audio uTrack24 audiolan에 대해서도 마찬가지입니다: 사용자 설명서 (18 페이지)
페이지 인쇄
10.4. Playback 24 Channels (Redundant Mode)
The song preparations for a redundant player system are straight forward. In this example we plan using an auto-
switcher that uses one track to decide whether a device is alive or not.
Create your content (including an "alive track") in your DAW, and the project(s) in uTool as usual. However, this time
we need two hard disks with exactly the same content. You can either normally export to your first hard disk and then
duplicate this hard disk using your PC, or you can use the more convenient "Export Batch" feature in uTool.
1. Song Preparation:
Step
Action
1
Create song
2
Define audio
3
Export
2. Playback:
Step
Action
1
Connections
2
Power up
3
Create SYNC group
4
Playback
SYNC
uTrack24
Aug. 2016
Remarks
Normal procedure, but one track should carry an "alive" sound for the
auto-switcher.
Normal procedure using uTool
Connect both hard disks to your PC, select the projects to export, then
click "Export Batch".
In the Export Batch window, select both hard disks as export targets, then
click "Export" on both targets.
Remarks
Connect the outputs of both uTrack24 units to an auto-
switcher. Then connect the auto-switcher's outputs to your
console.
Connect MASTER and SLAVES over Ethernet.
Connect the hard disks to the uTrack24 units and power up the
system.
Define MASTER and SLAVES
(see chapter 3.1 "Creating a SYNC Group")
Start playing by pressing the MASTER's play button.
Use only the MASTER's buttons to operate the system.
The auto-switcher will switch to uTrack24 B in case uTrack24
A should fail.
USE CASES
18