Aseptico AEU-20 운영 및 유지보수 매뉴얼 - 페이지 5

{카테고리_이름} Aseptico AEU-20에 대한 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aseptico AEU-20 12 페이지. Endodontic system

페이지 인쇄

OPERATION FUNCTIONS:

1. Power Switch - Controls power on/off to

console. When turned on, console display

should light.

2. RPM - Controls speed of motor and hand-

piece. Push the up arrow to increase

speed and the down arrow to decrease

speed. A visual display shows actual

RPM. For complete display accuracy, the

Ratio Selector must exactly match the ratio

of the handpiece being used. All settings

are held in memory even after unit is

turned off.

3. Forward/Reverse - Determines the rota-

tion of the motor and handpiece. A red

L.E.D. light and audible beeper indicate the

reverse rotation.

4. Ratio Selector - Calibrates the RPM dis-

play to read accurately for up to four differ-

ent handpiece ratios. Push the ratio

up/down arrow until the indicator light

matches the handpiece you are using.

Different handpiece ratios are required to

obtain different low speed ranges used in

endodontic procedures.

SPEED RANGES:

The speed ranges

with a 10K motor

are as follows:

1:1

1500 - 9500 RPM

1:8

100 - 950 RPM

1:16

50 - 600 RPM

1:64

20 - 150 RPM

*Speed ranges will be reduced when

using the Torque Control in positions 1, 2,

or 3. Full speed ranges are realized only

in the maximum torque control setting.

RPM

DISPLAY

RPM

DECREASE

FWD/REV

SELECTOR

HANDPIECE

RATIO INDICATOR

POWER SWITCH

TORQUE

LEVEL

RPM

INDICATOR

INCREASE

HANDPIECE RATIO

SELECTOR

TORQUE

SELECTOR

MOTOR RECEPTACLE