DogWatch BIGLEASH 매뉴얼 - 페이지 6
{카테고리_이름} DogWatch BIGLEASH에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DogWatch BIGLEASH 20 페이지.
페이지 인쇄4. Correction Level Adjustment
The correction levels can be adjusted up or
I
down from 0-10 by pressing the correction level
adjustment buttons.
Start at 1 and gradually increase the level until
I
you get the desired response from your dog.
Small and sensitive dogs usually respond to low correction levels; large or
stubborn dogs may require a stronger correction level.
"
We recommend using the lowest effective correction level.
Remember: Level 0 = Safety Mode (no audible, no correction)
5.
Dog 1 / Dog 2 Feature
Every BigLeash transmitter comes with two-dog capability. Your transmitter
comes set for use with one dog but can easily be programmed for two dogs.
If you are working with two dogs, you will need two receiver collars.
I
Information about setting the remote trainer to work with two dogs is
provided on page 20 and included with the purchase of the additional collar.
The Dog 1 and Dog 2 buttons allow you to change commands between the
I
two collars. When working with 2 dogs (two collars), the transmitter keeps
separate settings for each collar. The settings change automatically when
you switch from Dog 1 to Dog 2.
When working with 2 dogs, the display on the LCD screen will indicate if the
I
transmitter is set to send the signal to the collar on Dog #1 or Dog #2.
Correction Buttons
6.
Correction Button A
Pressing the 'A' button sends an
I
(sound only) to the dog's receiver collar. This audible
warning sound continues as long as you press the button (up to 8 seconds.)
7.
Correction Button B
Pressing the 'B' button sends a
I
receiver collar. Additional brief corrections may be sent after releasing the
button.
8.
Correction Button C
Pressing the "C' button sends a
I
the button down (up to 8 seconds.) If the button is not released, the
correction will automatically stop after 8 seconds. The collar will be ready to
receive another signal after the button is released.
When a correction button is pushed, the communication link line and transmitter
icon will blink briefly to confirm the signal has been sent and received.
[Audible]
audible warning
[Brief ]
brief correction
[Continuous]
continuous correction
6
Use the L and M buttons
to the right of the LCD
display to adjust the
correction level.
Continuou
Brief
(1 second) to the dog's
as long as you hold
"
s
Audible