Cymbol G3 Series 빠른 매뉴얼 - 페이지 7

{카테고리_이름} Cymbol G3 Series에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cymbol G3 Series 12 페이지. Network transmitter
Cymbol G3 Series에 대해서도 마찬가지입니다: 빠른 매뉴얼 (13 페이지), 빠른 매뉴얼 (16 페이지), 빠른 매뉴얼 (13 페이지)

페이지 인쇄

3.3 Setting the administrator password

To gain access to the product, the password for

the default administrator user must be set. This

is done in the "Admin Password" dialog, which is

displayed when the network transmitter is

accessed for the setup at the first time. Enter

your admin name and password, set by the

administrator.

Note: The default administrator username and

password is "admin". If the password is lost, the

Network Camera must be reset to the factory

default settings. See page 9.

3.4 Live View Page

The live view page comes in eight

screen modes like 704x480(576),

704x240(288),

176x120(144), 640x480, 320x240,

and 160x120. Users are allowed to

select the most suitable one out of

those modes. Please, adjust the

mode in accordance with your PC

specifications

and

purposes.

• General controls

The video drop-down list allows you to select a customized or pre-

programmed video stream on the live view page.

one out of video resolutions to be displayed on live view page.

The protocol drop-down list allows you to select which combination of

protocols and methods to use depends on your viewing requirements, and on the

properties of your network.

The preset drop-down list allows you to select the preset number for the

PTZ camera being used. This icon is inactivated if the PTZ settings are not set.

352x240(288),

monitoring

The resolution drop-down list allows you to select the most suitable