DogWatch System 1200 사용 설명서 - 페이지 6
{카테고리_이름} DogWatch System 1200에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DogWatch System 1200 16 페이지. System
DogWatch System 1200에 대해서도 마찬가지입니다: 설치 매뉴얼 (10 페이지), 소유자 매뉴얼 (12 페이지), 사용 설명서 (9 페이지)
페이지 인쇄
Receiver Status Light
• Battery Indicator This feature monitors the voltage level of the battery. Once the
receiver detects that the battery has reached a low voltage level, the status light will
change from the normal blinking
seconds. This indicates that your battery is close to the end of its useful life and you
should change the battery within the next 3-4 days.
Resetting the Low Battery Light
1. Remove the old battery.
2. Before inserting a new battery,
3. After five minutes, insert the new battery.
If you forget to wait prior to inserting a new battery, the "low battery" light will
continue to blink red until it automatically resets itself after 24 hours.
SYSTEM 1200 TRANSMITTER FEATURES
Range +/-: The radio signal is transmitted from the boundary wire in all directions.
The signal is adjusted by the range control on the transmitter to create a signal field
on each side of the wire. Your DogWatch Dealer will adjust the range accordingly. The
range control is very sensitive.
DogWatch System 1200 Transmitter
If you adjust the signal range
on the transmitter, be sure
you check the signal range in
the yard before letting your
dog out. Your dog will need
to learn where the new avoid-
ance zone begins.
Never adjust the signal range
when your dog is wearing the
receiver collar.
(cont.)
green
let the receiver sit for five minutes
On/Off Switch
Power
Supply
every 40 seconds to blinking
L
ON
POWER
M
OFF
Hidden Fences
www.dogwatch.com
PWR
System 1200
M
- 4 -
red
every 10
with no battery.
®
RANGE
GND
LOOP
M
M
Ground
Wire
Signal
Range
Control
Loop
Plug