Aseptiscope CSA-1 사용 설명서 지침 - 페이지 8
{카테고리_이름} Aseptiscope CSA-1에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Aseptiscope CSA-1 16 페이지.
페이지 인쇄Clean/Disinfect Dispenser
The dispenser can be cleaned with mild soap and damp cloth or with non-
abrasive disinfecting agents.
Dispenser Installation
1. Properly orient wall mount as
indicated by up arrows facing outward,
ensuring horizontal edge is level and
with 7" clearance above and below
the wall mount (Figure 10).
2. Secure the wall mount to the wall with
appropriate screws (Figure 10).
3. Position the dispenser above the wall
mount, align with the rails and
slide down onto the edges of the wall
mount (Figure 11) until the dispenser
clicks into place (Figure 12).
4. Install batteries (see Install/Replace
Batteries section).
5. Install Clean Cassette (see Install/
Replace Clean Cassette section).
8
Figure 10
Figure 11
Figure 12