Asetek SimSports Forte Direct Drive Wheelbase 18Nm 매뉴얼 - 페이지 9

{카테고리_이름} Asetek SimSports Forte Direct Drive Wheelbase 18Nm에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Asetek SimSports Forte Direct Drive Wheelbase 18Nm 19 페이지.

페이지 인쇄

2.5 Warnings and guidelines for safe operation

•
Asetek SimSports
conditions is under user's own responsibility.
•
Do not grab, hold, or insert fingers and/or objects to the rotating parts in a way where letting go
immediately is not always possible.
•
When operating the quick release, always disable torque by pressing the Torque off button
before removing or attaching a wheel.
•
Do not enable torque before a wheel has been securely attached.
•
On La Prima and Tony Kanaan Series do not operate the quick release while the wheelbase is
powered ON. Do not turn ON the wheelbase before a wheel has been securely attached.
•
Do not set torque level higher than the level the user can safely hold with a single hand grip.
•
If torque gets too high to control safely, let both hands off the wheel and press the Torque off
button.
•
Preventing motion by the means of RaceHub or simulator software are not reliable ways
•
to prevent motion.
•
Wheelbase user must be an adult and physically and mentally fit person.
•
Usage of the wheelbase is allowed only by an instructed person who understands and follows
•
the above safety instructions.
•
If the wheelbase becomes damaged in any way, stop using it immediately and contact Asetek
support or the reseller from who you have bought the wheelbase.
•
Using the vibration and force feedback may cause damage to your health.
•
Do not open the casing of the wheelbase or the power supply. There are no user serviceable
parts inside, and disassembling will void manufacturer's warranty.
•
Do not use the wheelbase with a power source other than the power supply packaged with the
•
wheelbase or received from an authorized reseller.
•
Do not use the wheelbase with any cables other than the cables packaged with the wheelbase
or received from an authorized reseller.
•
The wheelbase has magnets which may interfere with pacemakers, defibrillators and
programmable shunt valves or other medical devices. Do not put this product close to these
medical devices and the person who use any of these medical devices. Consult your doctor
before using this product if you have any concerns.
•
Asetek SimSports
•
damage or mishandle the power supply.
•
Operating environment:
• ο 15°C – 35°C room temperature, non-condensing humidity
• ο Do not expose the wheelbase to direct sunlight
•
ο Indoor use only
• Rotating high torque parts:
• ο S haft torque up to 27 Nm
•
Hot surface:
• ο Wheelbase surface temperature may reach 70C or 158F.
• ο Sudden rotation / vibration
• ο Wheelbase may start producing motion unexpectedly.
•
Please note that the wheelbase can get hot when used which
is normal operating procedure.
wheelbases are intended for professional use. Usage under other
®
power supply is not intended to withstand physical stress. Do not
®
9
Rotating shaft
Rotierende Welle
Arbre rotatif
Eje giratorio
High torque
Hohes Drehmoment
Couple élevé
Torque alto
Hot surface
Heisse Oberfläche
Surface chaude
Superficie caliente