ACQUA SOURCE RCP-1500 소유자 매뉴얼 - 페이지 7

{카테고리_이름} ACQUA SOURCE RCP-1500에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ACQUA SOURCE RCP-1500 12 페이지. Led pool light remote control

Pairing handheld transmitter & controller

The handheld transmitter is already paired in the factory and ready

to use. The RCP-1500 can pair with up to 6 handheld transmitters. In

case a problem arises, the pairing process can be done manually:

Manual Pairing process:

Make sure the RCP-1500 is connected to a power source.

1. Press the pairing button on the small circuit board, inside the con-

troller for at least 5 seconds.

--> The LED will start to blink fast

2. Within 25 seconds, press any button on the handheld transmitter.

--> If the transmitter is paired correctly, the LED will flash slowly for 5 times -->

If the RCP-1500 pairing memory is full, the LED will flash 15 times.

This means 6 handheld devices have already been paired.

To unpair all handheld transmitters with the controller: Push the pair-

ing button for at least 5 seconds, then do nothing for at least 25 sec-

onds.

--> The pair memory will be erased - the red LED will flash 5x on/off.

RCP-1500

Pairing button

Red LED

page 7 of 12