Cyndar Electronic Technology HL-1612 제품 설명서 - 페이지 10

{카테고리_이름} Cyndar Electronic Technology HL-1612에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cyndar Electronic Technology HL-1612 14 페이지. Safety edge sensor

5.Simple description of safety touch edge sensor wiring

Apply vertical pressure to the safety contact edge to make the

conductors of the internal induction belt contact each other,

which causes the resistance and current to change, which is

further analyzed by the control device. If the installation is

correct, as long as the internal induction belt is not damaged,

the safety edge cover can function normally even if it is damaged.

This product is normally open.

There are two core wires (black and red in two colors), black and red are a set of normally open

switches, which will be turned on under the action of external force (people step on it), thereby

transmitting signals to the controller or relay to achieve control of the machine .

1. This product is a pressure touch switch, which needs to be used with a controller or

relay.

2. The product is not suitable for use in water. If it is used in this environment, please

communicate with the supplier in advance.

Precautions:

1. This product must not directly contact the power source, and requires the auxiliary

use of a relay or a controller.

2. The maximum voltage is DC24V

Attached wiring diagram:

Two-wire non-resistance edge circuit diagram:

Circuit diagram with second wire: