Doherty PLE02 사용자 지침 - 페이지 6

{카테고리_이름} Doherty PLE02에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Doherty PLE02 20 페이지. 2 & 3 section plinths

3. PREPARING FOR USE

1. Clear the area intended for the plinth of any obstacles and ensure the floor is level.

2. Move the plinth to the approximate position required. If the plinth cannot be

moved the castors need to be unlocked. To unlock the castors the rear half of the

lock pedal must be pressed down.

3. Ensure there is a clearance gap of at least 200mm (8") at both ends of the couch

top.

4. Once the plinth has been positioned in its desired location the castors must be

locked. Press the front half of the lock pedal down to lock the plinth in position

(as shown in figure 1).

Fig1: Locking & unlocking castors

Castor unlocked

WARNING!

Castors must be locked when in use as it can be hazardous to both operator and

user.

Push down on pedal

Castor locked