Doherty PLE02 사용자 지침 - 페이지 9
{카테고리_이름} Doherty PLE02에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Doherty PLE02 20 페이지. 2 & 3 section plinths
페이지 인쇄4.2 Adjusting the Backrest
The Plinth is fitted with an adjustable angle backrest. If the backrest is adjusted
with a patient on the Plinth ensure they are capable of supporting themselves. If
this is not possible it may be necessary to seek assistance to enable the patient
to be supported whilst the backrest angle is adjusted.
•
To raise the backrest:
Lift the operating lever and gently lift the backrest up to the desired angle.
Release the lever once the backrest is at the desired angle.
•
To lower the backrest:
Lift the operating lever and gently push the backrest down to the desired angle.
Release the lever once the backrest is at the desired angle.
•
The backrest must not be used to raise the patient
•
Always ensure the backrest is locked in position
•
Do not sit on the backrest section
Fig 5: Adjusting the backrest
Lift
operating
lever
4. OPERATING THE PLINTH
WARNING!
Raise/lower
to desired
angle
7