ASG BLCA-9010 운영 및 유지보수 매뉴얼 - 페이지 3

{카테고리_이름} ASG BLCA-9010에 대한 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ASG BLCA-9010 13 페이지. 18v brushless cordless angle shut-off wrench

Read all instructions and make sure the appearance of the device has no damage before use.

Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.

1. Keep tool in a clean working area away from moisture to decrease the risk of electric shock or

short-circuiting.

2. Be alert to workplace safety

(1) Use the device in a well lit and clean environment.

(2) Keep children and other people away unless the person has been assigned for the task to

avoid the danger of injury.

(3) Do not work with the device in potentially explosive environments in which there are

flammable liquids, gases, dust, or other electrical power tools which create sparks.

(4) Do not use the device if you are tired or under the influence of drugs, alcohol or

medication.

3. Store the device in a safe place when not in use.

4. Always use a screwdriver that is intended for the task you are undertaking. Do not overload or

use it improperly such as drilling or tapping.

5. Dress properly. Do not wear loose clothing or jewelry while operating the tool to avoid danger.

6. By using the device correctly, make sure to hold it firmly with two hands in place before starting

the trigger.

7. Unplug the charger when not in use.

8. Remove the battery from the device when it is not being used.

9. Use only the accessories that are detailed in the operating instructions. The use of others

which are not recommended in the operating instructions may affect the functioning of the

device. It could lead to an increased risk of personal injury as well.

10. To protect parts in gearbox from damage, replace the grease at least once every year.

11. It is necessary for the operators to read and follow up on all of the operating instructions in this

manual. ASG is not responsible for any personal injury that may be caused due to disobeying

these instructions.

Warning