ASG BLCA-9010 운영 및 유지보수 매뉴얼 - 페이지 7
{카테고리_이름} ASG BLCA-9010에 대한 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ASG BLCA-9010 13 페이지. 18v brushless cordless angle shut-off wrench
페이지 인쇄
1. Full auto shut-off screwdriver
It stops automatically when the screw has been tightened and reached the set torque.
(1) Trigger switch
The LED lights turn on when the trigger switch has been pressed about one-third down, and then
the screwdriver starts functioning when the switch trigger has been pressed half way down; on the
contrary, it stops when the screw has been tightened or the trigger has been released.
(2) Forward / Reverse switch
When the switch is turned to the right as arrow indicates, the screwdriver will be fastening clock-
wise; Vice versa, when the switch is turned to the left, the screwdriver will be operating counter-
clockwise. As the diagram shows, always set the switch to neutral position when the screwdriver is
not being used.
(3) LED light
While pressing the trigger, the LED lights up automatically.
(4) Torque ring
Use the color torque rings to identify tools set to the same target torque.
(5) Waist hook
The waist hook allows users to carry the device easily by attaching it to their work belt.
(6) Functional light and the status indicator
Whenever the remaining power in the rechargeable battery is less than 20%, the red light will flash,
but the tool is still functional. Once the remaining power is closer to 10% or lower it may result in
poor performance.
Manual / Function
6