ASG BLCA-9020 운영 및 유지보수 매뉴얼 - 페이지 8
{카테고리_이름} ASG BLCA-9020에 대한 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ASG BLCA-9020 13 페이지. 18v brushless cordless angle shut-off wrench
페이지 인쇄
Functional indicator
Beep sound
(7) Torque adjustable
The torque is able to be changed by the following steps
(7.1) Remove the battery from the device or set the rotation
switch to neutral position to prevent the tool from starting
up unintentionally.
(7.2) Open up the torque safety cover cap; follow the illustration
on the right. Insert the torque wrench to adjust your torque
higher or lower.
(7.3) Adjust the torque in two directions (-) for less torque (+)
for more torque.
(7.4) Use an ASG torque tester to confirm your torque setting.
Do not exceed the stop line of the high and low torque when making adjustments shown in diagram
3.
OK screwing with preset torque
1 short beep
7
NG screwing
1 long beep