ASG HIOS CLT-45 운영 매뉴얼
{카테고리_이름} ASG HIOS CLT-45에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ASG HIOS CLT-45 2 페이지.
페이지 인쇄HIOS CLT-30, CLT-45, CLT-60, and CLT-80
Power Supply Operational Manual
Important: Please read and save the operating instructions.
Danger: To reduce the risk of fire or electric shock, carefully follow these instructions.
Storage, Operation, Set-Up
1.
Be sure that the power source is equipped with a circuit breaker.
2.
Store the power pack in a place free from excessive humidity, temperature, and dust. Keep
it away from metallic objects.
3.
Do not place objects on the unit.
4.
Use the fittings provided to secure the unit. The installation area should be vibration free.
5.
Do not store the unit next to high voltage equipment.
Caution
1.
Do not drop the power supply.
2.
Connect to a power source of only the specified voltage.
3.
Only use compatible screwdrivers with the power supply.
4.
Do not drag the unit by its power cord. Keep the cord away from foreign objects, oil, and sharp
implements.
5.
Grasp the plug when disconnecting the power cord.
6.
Do not disassemble or modify the unit.
7.
If the unit overheats, activates a circuit breaker, or exhibits other abnormalities, stop operation
immediately, unplug the unit, and contact ASG for repair.
8.
When the unit is not in use, turn the power switch off and disconnect it from its power source.
9.
For connection to a supply not in the USA, use an attachment plug adapter of the proper
configuration for the power outlet.
10. Install a leakage breaker and safety breaker on the input power source and connect the ground
to use the unit.
ASG, Division of Jergens, Inc.
S. Waterloo Road | Cleveland, OH
15700
44110-3898
| Phone: (
| Fax: (
| Email: [email protected] | Web: www.asg-jergens.com
888) 486-6163
216) 481-4519
Compatible Screwdrivers
Power Supply
For use with
CLT-30
1 screwdriver
CL-2000, CL-3000, SS-2000, SS-3000
CLT-45
1 screwdriver
CL-2000, CL-3000, CL-4000, CL-6000, CL-6500, SS-2000, SS-3000, SS-4000, SS-
6500, A-4500, A-5000
CLT-60
1 screwdriver
CL-2000, CL-3000, CL-4000, CL-6000, CL-6500, CL-7000, SS-2000, SS-3000, SS-
4000, SS-6500, SS-7000, A-4500, A-5000, A-6500
CLT-80
1 screwdriver
CL-9000
T-45BL
1 screwdriver
BLG-ZERO1: BLG-4000ZERO1, BLG-5000ZERO1, BLG-5000ZERO1-15*, BLG-
5000ZERO1-HT*
BLG-BC2: BLG-4000BC2, BLG-5000BC2, BLG-5000BC2-15*, BLG-5000BC2-HT*
BLG-BC1: BLG-4000BC1, BLG-5000BC1, BLG-5000BC1-15*, BLG-5000BC1-HT*
BLG: BLG-4000, BLG-5000, BLG-5000-15*, BLG-5000-HT*
BLG-OPC: BLG-4000-OPC, BLG-5000-OPC, BLG-5000-OPC-15*,
BLG-5000-OPC-HT*
BL: BL-2000, BL-3000, BL-5000, BL-5000-15*, BL-5020*
BL-OPC: BL-2000-OPB, BL-3000-OPC, BL-5000-OPC, BL-5020-OPC*
T-70BL
1 screwdriver
BL Series, BLG Series, BLG-4000BC2 Series, BLG-5000BC2 Series, BLG-
4000BC1 Series, BLG-5000BC1 Series
Specifications
Model Number
CLT-30
Input Voltage
AC100-240V 47-63Hz
Power Consumption
40W
Fuse Capacity
2A/250V (Built-in)
Output Voltage
2(30V), 1(20V) Two Stage Settings
Size (mm)
62 x 134 x 40(H)
Weight (g)
300
AC Cord Length
1.8m (inlet cord)
Accessories
(2) Attachment plates
(4) attachment screws
1: Primary Side
Compatible Screwdrivers
CLT-45
AC100-240V 47-63Hz
45VA-78VA
3.15A/250V (Built-in)
2(30V), 1(20V) Two Stage Settings
146 x x 42.6(H)
300
1.8m (inlet cord)
(1) Mounting Bracket
(1) attachment screws