CYNTEC VPN12AD02-FU 매뉴얼 - 페이지 4
{카테고리_이름} CYNTEC VPN12AD02-FU에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CYNTEC VPN12AD02-FU 12 페이지.
페이지 인쇄QUICK START GUIDE:
Power on/off
1.
Connect 3~4 LEDs from VOUT to GND if jumper JR25 is short, Connect 5~8 LEDs from VOUT
to GND if jumper is open.
2.
Short the jumper JR16 and JR18
3.
Give Power from VIN to GND (without EMI solution), from EMIIN to EMIG (with EMI solution)
4.
Open the Disable jumper to enable VPN12AD02-FU
5.
Short the Disable jumper to disable VPN12AD02-FU
Digital and analog dimming
1.
For digital dimming, open JR18 and give the PWM signal to PWMI pin.
2.
For analog dimming, open JR16 and give the analog signal to SET pin.
Frequency Spread Spectrum
1.
Add R11=10kohm to enable Frequency Spread Spectrum.
2.
Remove R11 to disable Frequency Spread Spectrum.
Output Load
JR25
Figure 3: Quick Start Guide for Constant Current Application
VPN12AD02-FU EVB GUIDE
JR16
JR18
4
Input Power
Rev. P05