CYP AU-11SA 운영 매뉴얼 - 페이지 3

{카테고리_이름} CYP AU-11SA에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CYP AU-11SA 16 페이지. V1.3 hdmi to hdmi repeater with audio decoder

1. Introduction

The AU-11SA is an advanced solution for HDMI to HDMI repeating with Audio

decoding. It is compatible with v1.3 HDMI specifications, a cutting-edge technology

which defines the transfer of Deep Colour (12 bits/colour) video with a high

bandwidth up to 225MHz. The AU-11SA also boasts signal amplification and

equalization of the signal at the output. The audio output supports uncompressed

analogue LPCM 7.1 and new lossless compressed digital Bitstream (Dolby TrueHD,

Dolby Digital Plus and DTS-HD Master Audio)

• Compliant with v1.3 HDMI, HDCP 1.1 and DVI 1.1 standards.

• Supports digital video formats in 'Deep Colour' mode from 25MHz to 225MHz

for 10/12bits colour.

• Supports high definition input up to 1080p@(24/50/60)Hz, output resolution

follows input.

• Supports HDMI signal amplification and equalisation at the HDMI output.

• Supports uncompressed digital LPCM 7.1, 5.1 or 2 channels and compressed

digital Bitstream (Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio)

through HDMI input and output ports.

• Supports digital Dolby 5.1/2 and LPCM 2 channels output through optical

output.

• Supports LPCM 7.1, 5.1 or 2 channels output through multichannel analogue

output ports.

• Integrated HDCP encryption for transmitting protected audio and video content.

• Support CEC bypass.

• AU-11SA

• 5V DC power supply adaptor.

• Operation Manual.

Page 1