Asgard FLEXISTORE 1511 매뉴얼

{카테고리_이름} Asgard FLEXISTORE 1511에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Asgard FLEXISTORE 1511 4 페이지.

FLEXISTORE 1511

BASE INSTRUCTIONS

Flat and firm base. Recommended: concrete, tarmac or paving flags.

Min. distance from walls/ shrubbery: 1000mm.

Min. base size (WxDxH) 1730mm x 1557mm x 50mm.

LEVELING THE UNIT

Correctly level the constructed unit using the shims (ZCOMPPLAS)

provided prior to fixing the unit to the ground. Slide the packing pieces

under the corners of the unit base as required until an equal gap has

been achieved around the door allowing for its smooth operation and

alignment.

Warning: some panels may weigh over

20Kg. Beware of manual handling

It is always recommended to anchor the unit to the ground. Drill through

the four holes in the base of the unit using 6mm dia masonry drill to a

depth of 70mm. Screw in the anchor fixings. (These have a self cutting

thread). If not anchoring the unit, fit the self seal plugs BEFORE

BUILDING to seal the fixing holes from underneath.

TOOLS REQUIRED

Power driver POSI-DRIV screwdriver, 6mm dia. masonry drill, a 10mm

socket or spanner.

For maintenance instructions of this product visit www.asgardsss.co.uk

Warning: Please keep

YOUR UNIQUE

this key card safe! Refer

KEY CODE

to if replacement key is

required.