Asgard GLADIATOR PLUS 2 매뉴얼
{카테고리_이름} Asgard GLADIATOR PLUS 2에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Asgard GLADIATOR PLUS 2 6 페이지.
Asgard GLADIATOR PLUS 2에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (6 페이지)
페이지 인쇄GLADIATOR PLUS 2
BASE INSTRUCTIONS
Flat and firm base. Recommended: concrete, tarmac or paving flags.
Min. distance from walls/ shrubbery: 1000mm.
Min. base size (WxDxH) 2410mm x 4940mm x 50mm.
LEVELING THE UNIT
Correctly level the constructed unit using the shims (ZCOMPPLAS)
provided prior to fixing the unit to the ground. Slide the packing pieces
under the corners of the unit base as required until an equal gap has
been achieved around the door allowing for its smooth operation and
alignment.
It is always recommended to anchor down the unit to the ground. Drill
through the four holes in each of the base of the unit using 6mm dia
masonry drill to a depth of 70mm. Screw in the anchor fixings. (These
have a self cutting thread). If not anchoring the unit, fit the self seal plugs
BEFORE BUILDING to block the fixing holes from underneath. Please
note, product must be bolted down to comply with LPS1175
TOOLS REQUIRED
Power driver POSI-DRIV screwdriver, 6mm dia. masonry drill and a
10mm socket or spanner.
For maintenance instructions of this product visit www.asgardsss.co.uk
Warning: some panels may weigh over
20Kg. Beware of manual handling
Warning: Please keep
YOUR UNIQUE
this key card safe! Refer
KEY CODE
to if replacement key is
required.
x2