CYP CETH-4HDMI 운영 매뉴얼 - 페이지 8

{카테고리_이름} CYP CETH-4HDMI에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CYP CETH-4HDMI 16 페이지. Ethernet/usb to 4 port hdmi converter

7.2 Rear Panel

. EDID Control switch: Each EDID control switch is determined if you are

①

going to use the EDID from the display or use an onboard EDID. When

select to TV, the EDID will attach to output TV. When selected to INT, the

EDID will become onboard EDID and the factory default setting is in TV

mode.

. HDMI output: Connect each of the output ports to the HDMI display. The

system can let you show the same content on each HDMI output,

different content on each HDMI output or you can extend an image

to cover all four HDMI displays. For more detail please check section 9

(Using DisplayLink Manager) for mirror or video extension settings.

. Audio in: This slot is to insert the audio through the PC 3.5 phone jack.

When the audio is inserted, the HDMI output ports will support audio at

the same time.

. Mini USB IN: this port support mirror or video extension (via USB cable) to

your HDMI displays.

. Input USB/RJ45 switch: this switch allows users to choose input source

signal from USB or RJ45.

. RJ45 IN: This slot is to connect with CAT5e/6 cable from your network system

or PC/Laptop.

. DC 5V: This slot is where you plug the 5V DC power supply into the unit and

connect the adaptor to an AC wall outlet.