CYP CLUX-H2SDI 운영 매뉴얼 - 페이지 13

{카테고리_이름} CYP CLUX-H2SDI에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CYP CLUX-H2SDI 20 페이지. Hdmi to 3g sdi dual-output converter

Note

1. Key:

"  " LED On

"●" LED Off

"  " LED Flashing

2. Not all of HDMI timings can be converted to SDI, therefore selecting the default EDID

settings provides the HDMI source with output timing reference.

3. EDID switch mode/Default EDID setting:

3G  1080p@60

HD  1080i@60

Update  720p@60

4. Due to the fact that the HDMI default timing is mainly set to 480p, there is a possibility

that the image will not be displayed correctly as that timing is not supported by SDI . To

avoid this, set the HDMI source input output setting to "Automatic" so that the source

equipment will receive the native EDID settings of the display.

5. The EDID update procedure only needs to be done for Nos. 4,8,12,16,20 & 24. (please

refer to "EDID Update button"in section 6.3).

6. When the HDMI input source signal has content that is HDCP encrypted the EDID

Update and Video Lock LEDs will both flash, the other LEDs will not illuminate and no

image will be displayed.