Dojo P2PE 사용 설명서 - 페이지 10

{카테고리_이름} Dojo P2PE에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dojo P2PE 16 페이지.

1. Poi Device Troubleshooting

4. POI Device Installation Instructions

Do not connect non-approved cardholder data capture devices.

The P2PE solution is approved to include specific PCI-approved POI devices. Only these devices denoted above in Table 3.1

are allowed for cardholder data capture.

If a merchant's PCI-approved POI device is connected to a data capture mechanism that is not PCI approved, (for

example, if a PCI-approved SCR was connected to a keypad that was not PCI-approved):

The use of such mechanisms to collect PCI payment-card data could mean that more PCI DSS requirements

▪

are now applicable for the merchant.

Do not change or attempt to change device configurations or settings.

Changing device configurations or settings may invalidate the PCI-approved P2PE solution in its entirety. Examples

include, but are not limited to:

Enabling any device interfaces or data-capture mechanisms that were disabled on the P2PE solution POI device.

▪

Altering security configurations or authentication controls on the POI device.

▪

Physically opening the POI device.

▪

Attempting to install unauthorized applications onto the POI device.

▪

4.1 Installation and connection

All of the Dojo devices listed within table 3.1 are P2PE enabled. To activate the P2PE encryption key you'll need to

complete the device set up.

Once you've received the device, you'll need to follow the steps below:

Check the device for any tampering

Switch it on

Connect the device to the internet (either through Wi-Fi, Ethernet or using mobile data from a SIM card). The

screens on the device will guide you through this

Continue to follow the setup guide on the device, entering your activation code when requested (this will have been

emailed to you).

Once setup is complete control of the device is yours. It's your responsibility to protect and maintain the device in line with

this document and the Data Security Policy.

If there are any issues during the setup process please let us know.

Note: Only PCI-approved POI devices listed in the PIM are allowed for use in the P2PE solution for account data capture.

Financial Conduct Authority (FCA FRN 738728) and under the Electronic Money Regulations 2011 (FCA FRN 900925) for the issuing of electronic money and provision of payment

services.Our company number is 06730690 and our registered office address is The Brunel Building, 2 Canalside Walk, London W2 1DG.

instructions