CYP CP-295NN 운영 매뉴얼 - 페이지 8

{카테고리_이름} CYP CP-295NN에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CYP CP-295NN 16 페이지. Cv/sv to hdmi scaler

CYP CP-295NN 운영 매뉴얼

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

1
SERV.: Reserved for firmware update only.
2
HDMI OUTPUT: Connect to an HDMI equipped display or AV
receiver for output of the combined video and audio output.
3
OPTICAL OUTPUT: Connect to an amplifier or active speakers with
an optical cable for LPCM 2 channel digital audio output.
4
AUDIO OUTPUT: Connect to an amplifier or active speakers with a
3.5mm mini-jack cable for analog audio output.
5
MENU Button: Press this button to enter the OSD (On-Screen
Display) menu and press it again to make a selection.
6
+/− Button: Press these buttons to:
When in the OSD menu
• Navigate up/down the OSD menu.
• To adjust the value of a menu selection.
Under normal operation (outside of OSD menu)
• Press the '+' button to switch between CV and SV inputs.
• Press the '+' button together with the 'MENU' button to switch the
output resolution to XGA@60 (1024×768).
• Press the '-' button together with 'MENU' button to switch the
output resolution to 720p@60.
• Press both the '+' and '-' buttons at the same time to reset the
device to the default settings.
3