CYP CPLUS-VHHE 운영 매뉴얼 - 페이지 10

{카테고리_이름} CYP CPLUS-VHHE에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CYP CPLUS-VHHE 20 페이지. 4k uhd+ edid emulator with hdcp converter
CYP CPLUS-VHHE에 대해서도 마찬가지입니다: 운영 매뉴얼 (16 페이지)

페이지 인쇄

6.3 Side Panel

YUV420: Press this button to enable or disable the YUV 4:2:0 color

subsampling function. When enabled, a 4K (4:4:4) source will be

converted to a 4K (YUV 4:2:0) output signal with the same refresh

rate.

EDID: Press this button to select the EDID to send to the HDMI

source. The available choices are: Internal, External, and User. The

internal EDID is set to 1080p60 with LPCM 2.0 audio. The External

EDID setting passes the EDID directly from the connected display

to the source. The User EDID is a customized EDID that has been

uploaded to the unit from the PC software. By default, the User

EDID is set to 4K@60 (YUV 4:2:0) with LPCM 2.0 audio.

ACTIVE SRC: Press this button to force the connected HDMI display

to switch to the input the unit is connected to.

Note: The HDMI display must support CEC in order to perform this

function.

PINHOLE: This recessed button is reserved for factory use only.

YUV420

EDID ACTIVE SRC