CYP PRO-H2-3GSDI 운영 매뉴얼 - 페이지 7

{카테고리_이름} CYP PRO-H2-3GSDI에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CYP PRO-H2-3GSDI 15 페이지. Hdmi to 3g-sdi dual output converter
CYP PRO-H2-3GSDI에 대해서도 마찬가지입니다: 운영 매뉴얼 (20 페이지)

페이지 인쇄

B. Connect HDMI source directly (without connecting to CLUX-H2SDI )

to HDMI monitor or TV to see if the image display and make sure the

source's output timing is supporting SDI or CLUXH2SDI's timing. If yes, go

to step C. If no, please change a different monitor or TV and adjust the

timing until the image display.

DVD Player

C. Connect the HDMI monitor or TV to the input port of CLUX-H2SDI and then

set the dip switch to EDID update position. Press the EDID update button

consistently until the Video Lock LED illuminate. In this step the device will

updating the monitor/TV's EDID to replace the default setting.

CLUX-H2SDI

D. Finally, connect the HDMI source to the input port of CLUX-H2SDI and

output connect to SDI monitor which should allow image display.

DVD Player

. EDID Update button: Use this function only when the image does not

②

display after trying to switch the EDID Update/HD/3G EDID swtich.

. EDID Update LED: This red LED will illuminate when EDID is being updating.

Detail in Section "EDID Update".

. Video Lock LED: This yellow LED will illuminate when the input HDMI has

received the signal and locked it.

. HDMI/DVI LED: This green LED will illuminate when the input source is HDMI

signal and will not illuminate when the input is DVI signal.

. 3G LED: This red LED illuminate when the input HDMI signal is 1080p@50/60.

. HD LED: This yellow LED illuminate when the input HDMI signal is

1080p@24/25/30, 1080i@50/60 or 720p@50/60.

Adjust to SDI accept Timing

(HDMI Cable)

1.Switch the dip switch to EDID update postion

2.Pressed on the EDID update button

consistently

(HDMI Cable)

HDMI

CLUX-H2SDI

HDMI

TV/Monitor

HDMI

TV/Monitor

SDI

SDI Monitor