Doka Staxo 40 원본 사용 설명서 - 페이지 3

{카테고리_이름} Doka Staxo 40에 대한 원본 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Doka Staxo 40 5 페이지. Shifting wheel

페이지 인쇄

Original Operating Instructions Staxo 40 shifting wheel

Maintenance & inspection

▪

Repairs may only be carried out by the manufac-

turer!

▪

Doka accepts no liability for products that have been

altered!

Before every use

➤

Check for any signs of damage or visible deforma-

tion.

Lifting accessories that do not meet the fol-

lowing criteria must be withdrawn from use

immediately:

▪

No deformation.

▪

No cracks or notches.

▪

No damage due to the influence of heat.

▪

Rating plate must be in place and clearly

legible

At regular intervals

▪

Inspection of lifting accessories must be performed

at regular intervals by an expert in conformity with

national statutory provisions.

Unless otherwise stipulated, such inspection must

be carried out at least once a year.

Storage

▪

Store lifting accessories in a dry and well ventilated

place, protected from the weather and from all corro-

sive substances.

999284802 - 08/2018

Preconditions for use:

NOTICE

▪

There must be a flat, firm (e.g. concrete),

adequately dimensioned floor that is capa-

ble of supporting the load.

▪

Max. permitted inclination of trackway: 2%

The permissible inclination of the trackway

must be determined by statical calculation

(risk of overturning, rolling forces).

▪

Either bridge any openings in the floor with

sufficiently strong planking/boards secured

so that they cannot slip away to either side,

or close off openings with sufficiently strong

side railings!

▪

Keep the travel route clean and free of any

obstacles.

▪

It is only permitted to travel Doka load-bear-

ing towers that have been braced in accord-

ance with the assembly plans and erection

rules given in the User Information booklet.

Fixing to the load-bearing tower

Preparations on the load-bearing tower

➤

In cases where the screw-jack feet are extended a

long way, reduce the extension length of the screw-

jack feet to dimension 'a'.

➤

Use the anti-dropout locks to fix the screw-jack feet

to the frames.

a ... max. 40 cm

A Staxo 40 screw jack foot

B Staxo 40 anti-dropout lock

C Basic frame Staxo 40