Ash Technologies Liberty Scholar 2 사용자 설명서 - 페이지 8

{카테고리_이름} Ash Technologies Liberty Scholar 2에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ash Technologies Liberty Scholar 2 20 페이지.

Reading Lens

The reading lens should be flipped up and onto the back of the camera

when viewing into the distance. It should be placed firmly down and

over the camera lens when looking at closer items.

There is a mirror mode available. If the camera is looking out

horizontally and the reading lens is down over the camera, it will

automatically mirror the image. In this mode the Liberty Scholar can

operate in a similar manner to a magnifying mirror.

Press the small round button for overview mode or to freeze the

image. The operation performed depends on how the button function

has been programmed. Refer below to the next section – "Menu".

Press to zoom in (magnify). At high zoom levels, the camera cannot

focus on objects closer than 1 meter with the reading lens up or closer

than 16cm with the reading lens in place. Objects closer than this may

or may not focus correctly depending on the level of zoom – this is

not a fault in the camera.

Press to Zoom out.

Certain aspects of the camera's operation can be customized through

its menu. The camera's menu can be accessed by keeping the

Function (top) button pressed for three seconds. Move up or down

through the menu by using the up (zoom-in) or down (zoom-out)

buttons. Press the Function button to select the function.

Page 8