CYP CMPRO-4H4H 운영 매뉴얼 - 페이지 9

{카테고리_이름} CYP CMPRO-4H4H에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CYP CMPRO-4H4H 20 페이지. 4 by 4/4 by 2 hdmi matrix
CYP CMPRO-4H4H에 대해서도 마찬가지입니다: 운영 매뉴얼 (16 페이지), 운영 매뉴얼 (16 페이지)

페이지 인쇄
CYP CMPRO-4H4H 운영 매뉴얼

6.2 Rear Panel

INPUT
1
2
3
1
1
INPUT 1/2/3/4: Connect to HDMI equipped source devices such as
DVD/Blu-ray players, set-top boxes or games consoles.
2
OUTPUT A/B/C/D: Connect to an HDMI TVs/displays or monitors for
display of the selected source signal.
3
IR IN: Connect the supplied IR Extender for IR signal reception
from the remote control included in the package. Ensure that the
remote is within the direct line-of-sight of the IR Extender.
4
RS-232: Connect to a PC/laptop or RS-232 control system with a
D-sub 9-pin male cable to control the unit with RS-232 commands
(see Section 6.6).
5
CONTROL: Connect to an active Ethernet link with an RJ45
terminated cable to control the unit with Web GUI (see Section 6.7).
6
SERVICE: Manufacturer use only.
7
DC 5V: Connect the 5V DC power supply to the unit and plug the
adaptor into an AC outlet.

6.3 Remote Control

1
POWER: Press this button to switch the
unit ON or to put it into standby mode.
2
OUTPUT A and 1~4: Press buttons 1~4 to
select the required source for Output A.
3
OUTPUT B and 1~4: Press buttons 1~4 to
select the required source for Output B.
4
OUTPUT C and 1~4: Press buttons 1~4 to
select the required source for Output C.
5
OUTPUT D and 1~4: Press buttons 1~4 to
select the required source for Output D.
OUTPUT
4
2
IR IN
RS232
CONTROL
SERVICE
3
4
5
6
POWER
OUTPUT
A
OUTPUT
B
OUTPUT
C
OUTPUT
D
CR-33
POWER
DC 5V
7
1
2
3
4
5
4