Closer pets Mi Bowl CP500 매뉴얼 - 페이지 15

{카테고리_이름} Closer pets Mi Bowl CP500에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Closer pets Mi Bowl CP500 18 페이지.
Closer pets Mi Bowl CP500에 대해서도 마찬가지입니다: 매뉴얼 (8 페이지)

FAQ –
The feeder doesn't open for my pet
Ensure your pet has been successfully paired
to MiBowl – see Quick start guide. Clean any
dirt or food within the feeding area. Check
that there are no obstructions or dirt above
the bowl and that all plastic faces are clean
and free of debris.
The feeder opens for a non-paired pet
If you find your MiBowl is opening for a non-
paired pet, it may be because your paired pet
is sitting next to the feeder. Try keeping your
MiBowl against a wall to prevent pets from
unintentionally activating the lid.
The lid won't open and/or the blue
light is flashing
A flashing blue light indicates that there is
something wrong with the lid and it may be
stuck. Open and/or Close to operate the lid. If
this fails, remove, and replace the lid and bowl
to check they are fitted correctly. Take care to
locate the bowl over the catch at the back of
the feeder – see How to remove the bowl and
lid. Check that there is no food build-up and the
food level is not proud of the bowl.
My pet is knocking the feeder over
while eating
Place your feeder against a wall. If your pet
still manages to overcome the feeder, secure
the base using the keyhole fixing features
located on the underside of MiBowl.
The lid is taking a long time to close
You may be in Training mode – see Pet training
school. Press and hold Training to exit Training
mode – your feeder will now revert to default
and the lid will close sooner when your pet
moves away after feeding.
My pet won't use the feeder
Every pet is different, and some pets may take
longer to get used to feeding from MiBowl. Be
patient with them and go through the first few
steps of the Quick start guide again to help
your pet become comfortable using MiBowl.
I can't get the bowl out
The bowl can only be removed by pressing
Open. When automatically opened by your
pet, the lid is in a pet-safe position preventing
the bowl from being removed accidentally or
by very hungry pets!
I want to remove a paired pet or
remove all current settings
Factory reset will remove all paired pets
and Training mode settings. To factory reset
press and hold Training + Open + Close
on
or Sync + Open + Close on
at the same time until all the
lights start flashing.