CYP PU-O4H4C 운영 매뉴얼 - 페이지 3
{카테고리_이름} CYP PU-O4H4C에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CYP PU-O4H4C 12 페이지. V1.3 hdmi 4x4 matrix with built in hdmi over cat6 outputs
CYP PU-O4H4C에 대해서도 마찬가지입니다: 운영 매뉴얼 (16 페이지)
페이지 인쇄
1. Introduction
All the PUMA, HDMI over CAT5e/6 transmitters and receivers are the perfect
solution to extend HDMI signals via CAT cabling up to 40m. The PU-O products
within the PUMA range combine HDMI over CAT5e/6 (PUMA) & HDMI Matrix
switcher (ORBIT) to provide versitility to HDMI installations. The PU-O4H4C HDMI
matrix has 4 HDMI input and 4 CAT transmitter outputs, designed to be used with
PU-1106RX receiver units. Each of the four HDMI sources can be directed to any
one of the four CAT outputs, so each display can show the same or a different
source.
2. Features
• v1.3 HDMI, HDCP 1.1, DVI 1.0 compliant.
• HDMI 4x4 Matrix with built in HDMI over CAT6 transmitter outputs.
• Resolutions supported: PC - VGA to UXGA ; HDTV - 480i to 1080p + 1080p24fps
•
Master Audio + LPCM
• The HDMI input is compensated, clock / phase adjusted, and jitter eliminated
so the output is a brand new standard HDMI signal.
• Supports Deep Colour (10/12 bit).
•
• LED indicators
• Supports 3D signals
3. Package Contents
• 4 by 4 HDMI V1.3 Matrix Infrared Repeater Box (CIR-12)
• Remote Control (with Battery)
• 1 x IR Receiver.
Page 1