Ashcroft 2036 사용 설명서 - 페이지 13

{카테고리_이름} Ashcroft 2036에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ashcroft 2036 20 페이지. Digital sanitary gauge

Step 5: Press the ENTER key to finalize your choice. The

gauge display will now display SET. After two seconds the

screen will display the pressure value for 0% on the top

line. The middle line indicates the bar graph at 100% of

fullscale. The bottom line will display SET 0.

Step 6: Press the

key) on the keypad to increase or decrease gauge value at

0% of range.

Step 7: Press the ENTER key to finalize your choice. The

new values for the bar graph and 4/20mA settings have

now been saved.

OFF: This option sets the amount of time before the gauge will

turn itself off. Offerings are Never*, 30MIN,10MIN, 5MIN, 2

MIN.

To use the OFF option:

Step 1: Press the MENU key.

Step 2: Press the

key) until the word OFF appears.

Step 3: Press ENTER.

Step 4: Press the

key) to select the desired OFF time.

Step 5: Press the Enter key to finalize the OFF setting.

UPDATE: This option allows for changing the rate at which

pressure is updated on the display screen. This feature is

useful with rapid changes in process pressure that may

cause flutter of the display. Options are 100ms*, 1 sec,

500ms and 200ms, updates per second or 100ms*.

Since customer processes vary, update rates should be

selected based on the application.

To use the UPDATE option:

Step 1: Press the MENU key.

*Indicates default.

MENU FUNCTIONS

(up arrow key) or

– 13 –

(down arrow