DOL 26SCR 기술 사용 설명서 - 페이지 2

{카테고리_이름} DOL 26SCR에 대한 기술 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DOL 26SCR 4 페이지. Capacitive sensor

1 Product description

DOL 26 is a capacitive sensor for detection of loose and solid materials.

SCR output versions are available in 2-wire versions.

PNP output versions are available in 4-wire versions.

The products are suitable together with contactors, relays, PLC's and similar within the agricultural and indus-

trial sectors. DOL 26 is immune to EMI, short circuits and any overload. The mechanical design makes DOL 26

ideal for integration into applications with limited space. The full-return option is especially suited for feeding

pans. Very low power consumption in off state – enables possibility for sensors working in parallel on the same

contactor. Unique possibility for controlling cross auger systems.

2 Mounting guide

Smooth version mounted

within a PG 21 gland

Threaded version mounted with M18 nut.

3 Installation guide

Installation, servicing and troubleshooting of all electrical equipment must be carried out by quali-

fied personnel in compliance with the applicable national and international standard EN 60204-1

and any other EU standards that are applicable in Europe.

DOL 26SCR

DOL 26PNP

Mounting restrictions for non-flush (side sensi-

tive version)

DOL 26SCR:

Connect the sensor in series with the load. The polarity is unimportant.

The sensor is protected against overload and short circuit. If the output cur-

rent exceeds the nominal output current, the output function is switched off.

Remove the short circuit or choose a smaller load to remove the error. The

current limitation error is indicated on the sensor by double flashes followed

by a pause.

DOL 26PNP/NPN:

Connect the sensor to a DC supply and connect the loads between the out-

puts and V- for the PNP version and V+ for the NPN version.

www.dol-sensors.com

Technical User Guide

DOL 26SCR PNP/NPN