Akron DECKMASTER 3440 설치, 운영 및 유지보수 지침 - 페이지 2

{카테고리_이름} Akron DECKMASTER 3440에 대한 설치, 운영 및 유지보수 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Akron DECKMASTER 3440 15 페이지. Electric monitor for standard configuration with potentiometers & u2 logic box

페이지 인쇄

Product Ratings

Electrical Specifications

MOTOR

Rotation

Elevation

Swing Arm

Pattern**

* Normal operating currents depend on operating conditions such as pressure, flow, etc.

** Pattern currents depend on the type of nozzle being used.

Mechanical Specifications

Parameter

U.S. Measure

Maximum Flow Rate

1250 GPM

Maximum Pressure

Mass

Tools Required

• Wrench for flange mounting bolts

• 1/2" hex head wrench in case there is a need to change the hard stop locations

Safety Symbols

Indicates a hazardous situation which, if not avoided, WILL result in death or serious injury

Indicates a hazardous situation which, if not avoided, COULD result in death or serious injury

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury

Addresses practice not related to personal injury

Product Warnings, Cautions and Notices

Use only for firefighting by trained operators.

Charge the unit slowly. Rapid charging may cause a pressure surge that has the potential to cause

an injury, or damage the monitor.

Do not stow or deploy the monitor while flowing. Pressing the Stow or Deploy button causes the

nozzle to move automatically and the water stream may cause damage to equipment or injury

to personnel.

Aim the unit in a safe direction before pumping water through it, e.g., away from power lines.

Do not use the electric controls when the manual override cranks are being used or are in

position for use.

Do not exceed the maximum pressure or flow ratings of the monitor. Exceeding these ratings may

lead to an injury or may cause damage to the monitor.

12-VOLT SYSTEM (11-14 Volts DC)

Maximum

Operating Current

14 Amps

3-10 Amps

Metric

Measure

4800 LPM

200 PSI

14 Bar

55 Lbs.

25 kg

24-VOLT SYSTEM (22-28 Volts DC)

Normal*

Maximum

Operating Current

3-10 Amps

0.7-5.0 Amps

1.5-5.0 Amps

Page 2

Normal*

Operating Current

7.5 Amps

2-5 Amps

7.5 Amps

2-5 Amps

7.5 Amps

2-5 Amps

0.4-2.5 Amps