dol sensors DOl 10 기술 사용 설명서 - 페이지 2
{카테고리_이름} dol sensors DOl 10에 대한 기술 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. dol sensors DOl 10 8 페이지. Kit for water temperature
페이지 인쇄
Product and Documentation Changes
dol-sensors reserves the right to change this document and the product herein described without further notice.
In case of doubt, please contact dol-sensors.
The date of change appears from the front and back pages.
Note
• All rights belong to dol-sensors. No part of this manual may be reproduced in any manner whatsoever with-
out the expressed written permission of dol-sensors in each case.
• All reasonable efforts have been made to ensure the accuracy of the information contained in this manual.
Should any mistakes or imprecise information occur in spite of this, dol-sensors would appreciate being no-
tified thereof.
• Irrespective of the above, dol-sensors shall not accept any liability with regard to loss or damage caused or
alleged to be caused by reliance on any information contained herein.
• Copyright by dol-sensors.
1 Product description
DOL 10 kit is used to measure the water temperature in the water line in connection with water flushing.
(C)
2
(D)
DOL 10 kit for water temperature contains:
• 1 DOL 10 temperature sensor with five m. cable and rubber case.
• 1 6.5 mm drill bit
• 1 tube of silicone glue
• 2 stips
• 1 Technical User Guide
2
(A) Controller
(B) Water line
(A)
(C) Cable two-wire, Ø5 mm
(D) DOL 10 kit
(B)
www.dol-sensors.com
Technical User Guide
DOl 10 kit for water temperature