CYP CPRO-3D42S 운영 매뉴얼 - 페이지 8

{카테고리_이름} CYP CPRO-3D42S에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CYP CPRO-3D42S 14 페이지. 4 by 2 hdmi switcher with heac
CYP CPRO-3D42S에 대해서도 마찬가지입니다: 운영 매뉴얼 (12 페이지)

페이지 인쇄

6.2 Rear Panel

RS-232

This slot is to connect with a PC or control system with D-sub 9pin

cable for RS-232 control. For detail RS-232 commands please refer

to Section 6.4.

HDMI OUT 1~2/ARC 1~2/ETHERNET 1~2

HDMI/HEAC equipped TVs or displays will pass the Ethernet and

Audio signals via HDMI v1.4 cable back to the HDMI Output port,

the splitter will separate the Ethernet and audio, and will output

audio from the ARC and bi-directional data streams through the

Ethernet ports. If the display has a built-in tuner or an attached

DVD player, audio content can be sent "upstream" from the TV

back to the audio system to be output in multi-channel audio.

The HDMI Switcher can use the HDMI Ethernet Channel (HEC) to

consolidate video, audio and data streams into a single HDMI

cable connection to an Ethernet Hub/modem in order to access

the internet and also incorporates a dedicated data channel

into the HDMI link, enabling high-speed, bi-directional networking

at up to 100 Mb to control and search from the sink (please see

Section 6 for connection diagram). The HDMI output number is

correspondingto ARC and Ethernet output number.

Note 1: Be sure to connect devices with a suitable HDMI cable

designed to support the Ethernet Channel functionality, either the

standard HDMI cable with Ethernet or High Speed HDMI cable with

Ethernet.

HDMI OUT

HDMI IN

DC 5V