CYP EL-41WX 운영 매뉴얼 - 페이지 8

{카테고리_이름} CYP EL-41WX에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CYP EL-41WX 16 페이지. V1.4 xpressview hdmi wall mountable 4-way switcher

Note

A. This system was tested with 24AWG cables if using cables of another

type, the performance of this system may vary.

B. Cable distance tested with a PS3 & 40" Samsung LED LCD TV.

C. Figures provided in this manual are for reference only, actual figures

may depend on the source and display used along with the cables

specifications.

7.3 Top Panel

DC 5V: Plug the 5V DC power supply into the unit and connect the adaptor

to an AC outlet. The LED will switch on when the power cable is plugged in.

USB 5V: This slot is where you can connect the mini USB cable from your PC

to supply power.

Note: Power supply only support either DC5V or mini USB power.

RS-232: This slot is to connect with a PC or control system with D-Sub 9pin

cable for RS-232 control. For detailed RS-232 commands please refer to

section 9.

COAX OUT: This slot is where you connect an amplifier for sending an audio

signal with coaxial cables. When audio return function is on the audio

signal will be received from the output end and when the audio return

function is OFF the audio signal will be received from the input source. This

device supports PCM 2CH and AC3.

Note:

A. The display TV or monitor must support an audio return function and the

function be must turned on in order to perform properly.

B. The display TV or monitor's HDMI input jack must connected to the one

with an audio return function.

①

②

③

④