CYP CH-103Rx 운영 매뉴얼 - 페이지 3

{카테고리_이름} CYP CH-103Rx에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CYP CH-103Rx 4 페이지. Cat6 to hdmi receiver
CYP CH-103Rx에 대해서도 마찬가지입니다: 운영 매뉴얼 (4 페이지), 운영 매뉴얼 (16 페이지)

페이지 인쇄

1. Introduction

This is the Receiver (Rx) unit of CAT6 to HDMI Solution that can receive the

digital signal through CAT6 cables. This is compatible with HDMI v1.3

specifications, a cutting-edge technology which defines the supports to

transfer Deep Color (12 bits/color) video and new lossless compressed

(Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio) Digital audio,

with a bandwidth up to 225MHz. The installation of CAT6 to HDMI is easy

and quick, simply place receiver side next to your CAT6 transmitter unit,

then place the CAT6 to HDMI receiver side to your display and get all

necessary cables connected and enjoy.

2. Features

HDMI 1.3, HDCP 1.1 and DVI1.1 Compliant.

●

Supports digital video formats in Deep Color Mode at up to 36 bits

●

(12bits/color) and new lossless compressed (Dolby TrueHD, Dolby Digital

Plus and DTS-HD Master Audio) Digital audio.

Supports CAT6 cables of variable types.

●

Supports equalize and recover incoming TMDS data before re-transmitting

●

them with optimal quality regardless of the incoming signal quality.

Supports high definition resolution, the cable distance test with 1080p/8bits

●

resolution the Input/Output source can run up to 45/15 meters. If

1080p/12bits resolution the Input/Output source can run up to 15/15

meters.

Supports CEC bypass.

●

Supports xvYCC.

●

3. Package Contents

CAT6 to HDMI Receiver.

●

5V DC power supply adaptor.

●

Operation Manual.

●

4. Operation Controls and Functions

4.1. Front Panel

1 Video input: Connect the video input to the video output of the

transmitter unit using CAT6 cable.

2 DDC input: Connect the DDC input to the DDC output of the transmitter

unit using CAT6 cable.

DDC

VIDEO

CAT6 INPUT