CYP CH-1602TX 운영 매뉴얼 - 페이지 8

{카테고리_이름} CYP CH-1602TX에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CYP CH-1602TX 15 페이지. Hdmi over hdbaset transmitter and receiver with optical audio return (oar)
CYP CH-1602TX에 대해서도 마찬가지입니다: 운영 매뉴얼 (16 페이지)

페이지 인쇄

6.2 Transmitter Left and Right Panels

Left

CAT5e/6/7 OUT

CAT5e/6/7 OUT: Connect to the Receiver unit with a single

CAT5e/6/7 cable for transmission of all data signals. Under proper

connection the green LED will illuminate to indicate PoE activated.

The yellow LED will illuminate to indicate successful connection

between Transmitter and Receiver, when it blink irregularly it

represent the link error or when not illuminate it means no link with

Reciever.

LAN: Connect to an internet or network connection. The yellow LED

will illuminate to represent the link with Receiver is steady, when

it blink irregularly it represent the link error or when not illuminate

it means no link with Receiver. The green LED will illuminate to

represent the Ethernet speed is with 100Mbit/s.

OPT. OUT: Connect to speaker with coaxial input for audio signal

output from Receiver's OPTICAL IN.

ARC OUT OFF/ON SWITCH: Switch this dip switch to allows ARC

(Audio Return Channel) function to be activate or not. Switch to

OFF to disable ARC function. Switch to ON allows Receiver's HDMI

output audio to be routed back and output to both HDMI IN and

Optical OUT on the transmitter side.

Note: When ARC switch to ON, depending on the connected

devices of the HDMI OUT & Optical in, the ARC input/output

transmission distance may be varied. It is suggested to use cable

within 2 meters long to ensure the best audio quality.

HDMI IN: Connect to HDMI source equipment such as a DVD or

Blu-ray player.

Right

OPT.

ARC OUT

LAN

OUT

OFF ON

HDMI IN