CYP CH-1602TXR 운영 매뉴얼 - 페이지 9

{카테고리_이름} CYP CH-1602TXR에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CYP CH-1602TXR 16 페이지. Hdmi over hdbaset transmitter and receiver with optical audio return oar

페이지 인쇄

6.2 Transmitter's Side Panels

OPT.

LAN

OUT

2 3

LAN: Connect to an Ethernet supporting device or to your local

network as appropriate. The yellow LED will illuminate to indicate a

successful LAN connection between the Transmitter and Receiver

and will blink to indicate a data transmission. The green LED will

illuminate when the connected Ethernet speed is 100Mbit/s.

OPT. OUT: Connect to an audio receiver or powered speaker set to

reproduce the audio signal from the Receiver's OPT. IN port.

ARC OUT ON/OFF: Enables or disables support for ARC (Audio

Return Channel) signals from the HDMI device connected to the

Receiver. When switched to ON the ARC audio will be routed to

both the HDMI input as well as the OPT. OUT port. When switched

OFF no ARC audio will be passed.

Note: When ARC is enabled the maximum supported HDMI cable

length may vary. It is suggested to use cables under 2 meters long

to ensure the best audio quality.

HDMI IN: Connect to HDMI source equipment such as a media

player, game console or set-top box.

CAT5e/6/7 OUT: Connect to the Receiver unit with a single

Cat.5e/6/7 cable for transmission of all data signals. The yellow LED

will illuminate to indicate a successful data connection between

the Transmitter and Receiver. If the yellow LED blinks irregularly it

indicates a data link error. The green LED will illuminate to indicate

when PoH is active.

ARC OUT

OFF ON

HDMI IN

CAT5e/6/7 OUT