CYP CH-1605TXV 운영 매뉴얼 - 페이지 9

{카테고리_이름} CYP CH-1605TXV에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CYP CH-1605TXV 20 페이지. 4k uhd+ hdmi over hdbaset 2.0 transmitter (pse) with hdr/arc

6. OPERATION CONTROLS AND FUNCTIONS

SERVICE Port: This port is reserved for firmware update and serial

control use only.

ARC & OPT LEDs: These LEDs illuminate to indicate if the optical

output source is coming from the optical input or ARC on the

connected Receiver.

Note: Selecting ARC as a source requires a compatible Receiver.

HQ/STD SWITCH Button: This switch allows the user to select which

compression mode to use when AVLC is required. A single press

toggles between modes.

HQ (High Quality) mode uses the least amount of compression and

provides the highest possible visual quality (perceptually identical

to the original). In this mode, AVLC compression activates for any

signal requiring more than 9Gbps.

STD (Standard Quality) mode applies additional signal reduction

methods to lower the bandwidth requirements even further,

improving transmission reliability at the cost of some visual fidelity.

In this mode, AVLC compression activates for any signal requiring

more than 7.5Gbps.

HQ/STD LEDs: These LEDs illuminate to indicate which AVLC mode

is selected: HQ (High Quality) or STD (Standard Quality).

POWER LED: This LED will illuminate to indicate the unit is on and

receiving power.

LINK LED: This LED will illuminate solidly when a live connection with

a compatible Receiver is active.

SERVICE

ARC

HQ/STD

OPT

SWITCH

POWER

STD

LINK