Ashcroft S5500 설치 및 유지보수 지침 매뉴얼 - 페이지 6

{카테고리_이름} Ashcroft S5500에 대한 설치 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ashcroft S5500 8 페이지. All stainless steel gas actuated thermometer
Ashcroft S5500에 대해서도 마찬가지입니다: 설치 및 유지보수 지침 매뉴얼 (8 페이지)

페이지 인쇄

Installation and Maintenance Instruction Manual for All

Stainless Steel Gas Actuated Thermometer Model S5500

(non-electrical device) in a configuration for explosion risk areas pursuant to

Directive 2014/34/EU (ATEX)Zone I and II, Category 2, Group II for gas and dust

• Sharp edged bended capillary line

• Extended storage at temperatures above 60°C

In these instances, replacement of the gauge is always

required.

10.4 Conduct following fault rectification

See Chapter 8 Mounting/Installation

11 DEMOUNTING, DISPOSAL

11.1 Safety

Residues of measuring media in and on removed gauges

can constitute a risk to people, the environment and

equipment. Adequate precautionary measures are to

be adopted. If necessary, the devices are to be cleaned

thoroughly (see advice in safety data sheets).

11.2 Demounting

• When undertaking servicing work on the

device fitted without a thermowell, the lines

must be depressurized and the plant secured

against being switched on again.

• Demount the gauge using a suitable tool.

11.3 Disposal

Please help to protect the environment and dispose of or

recycle the devices and components used in accordance

with the applicable regulations.

12 APPENDIX

12.1 Declarartion of conformity

See page 7.

12.1 Datasheets for all stainless steel gas

actuated thermometers

More detailed datasheets are available direct from the

manufacturer (see 1.6 Manufacturer address, customer

services).

The table below contains an overview of the individual

documents.

Model

Description

S5500

All stainless steel gas

actuated thermometer, Model

S5500 pursuant to EN 13190

All sales subject to standard terms and conditions of sale. S5500_Gas_Act_Therm_RevA_(008-10293)_05-26-21

Document

G2.S5500

of 8