Dolby Laboratories DP591 빠른 시작 매뉴얼 - 페이지 12
{카테고리_이름} Dolby Laboratories DP591에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dolby Laboratories DP591 19 페이지. Object authoring tool
Dolby Laboratories DP591에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (9 페이지)
페이지 인쇄
Figure 4: Input Channel Routing window
3. Drag and drop the individual dynamic objects into other channels. Only one dynamic
object can occupy a channel at a time. If you move a bed or a dynamic object to an already
occupied channel, it replaces the bed or dynamic object previously in that channel.
When placed in an available channel, the icon for the dynamic object turns green, similar
to the bed icon.
4. When all of the dynamic objects are mapped, click Close to close the window.
4.5 Enabling dynamic objects for presentations
About this task
You must select a presentation, and enable a bed with dynamic objects for that
presentation, to make them available for reuse with presentations.
Prior to enabling objects, the first presentation button (1) is selected.
Procedure
1. To enable and add an audio object to a presentation, select the Enable check-box.
2. To change a presentation name, double-click on the Presentation name field.
The name field becomes available for entry.
3. Enter the name you want to use for the presentation (for example, Presentation 1 ) and
click Save.
4. Add any additional dynamic objects you want for that presentation.
5. Repeat this procedure for each presentation you want to create.
6. Click Save.
4.5.1 Setting dynamic object parameters
About this task
You can set a range of parameters for individual dynamic objects, including gain, category,
and field placement parameters.
Dolby DP590 object authoring tool quick-start guide
24 June 2016
4.5 Enabling dynamic objects for presentations
12