CYP PUV-3050TX-UA 운영 매뉴얼 - 페이지 9

{카테고리_이름} CYP PUV-3050TX-UA에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CYP PUV-3050TX-UA 20 페이지. Uhd+ hdmi over hdbaset3 transmitter with analogue audio i/o & usb 2.0

페이지 인쇄

recent cable test result was successfully passed.

FAIL LED: This LED will illuminate solidly to indicate that the most

recent cable test resulted in a failure with too many detected errors.

POWER LED: This LED will illuminate to indicate the unit is on and

receiving power.

LINK LED: This LED will illuminate solidly when a live connection with

a compatible receiver is active.

6.2 Rear Panel

DC24V 2.7A

DC 24V/2.7A Port: Plug the 24V/2.7A DC power adapter into this port

and connect it to an AC wall outlet for power.

USB 2.0 Port (Micro-B) & LED: Connect directly to a standard USB

host such as a PC or laptop to extend their USB functionality to

all currently connected USB devices on both ends of the HDBaseT

connection. The LED will illuminate solidly to indicate when the USB

port is active.

Note: If USB hosts are connected to both the transmitter and receiver at

the same time, only the most recently connected host will be active.

CAT6A/7 OUT Port: Connect to a compatible HDBaseT receiver with a

single Cat.6A/7 cable for extension of all data signals. PoH will also be

supplied to a connected compatible PD receiver.

Note: The PoH function is designed for powering compatible receiver units

only. Non-PoH receivers will need their own power supply. Receivers from

other brands may not be compatible.

HDMI IN Port: Connect to HDMI source equipment such as a media

player, game console, or set-top box.

HDMI OUT port: Connect to an HDMI TV, monitor, or amplifier for

digital video and audio output.

USB

CAT6A/7 OUT

HDMI IN

HDMI OUT