CYP CA-USBST 운영 매뉴얼 - 페이지 6

{카테고리_이름} CYP CA-USBST에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CYP CA-USBST 12 페이지. Usb over single cat5e/6 transmitter and receiver

• LED indicators for easy viewing

• Each USB output port contains 500 mA of power

6. OPERATION CONTROLS AND FUNCTIONS

TRANSMITTER

USB Link

This LED will illuminate when the transmitter has linked with

receiver's USB signal.

Power LED

This LED will illuminate when the device is plugged with

power supply.

DC 5V

Plug the 5V DC power supply into the unit and connect the

adaptor to an AC outlet.

Link Pair Select

This dip switch allows user with multi-pairs setting for link up to 16

pairs of the devices with single IP router. Each pair must have the

same dip switch setting in order to pair to the right device setting.

The factory default setting is at 0000.

Note: To activate the setting a re-power on is required after

each new setting.

Link On/Off button

Press this button to allow the receiver to be link up or unlink